Aspire NX75-Z Box MOD Specifications:

Manufactured by: Aspire

Wattage Range: 1W – 75W

Temperature Range: 200°F – 600°F (100°C – 315°C)

Battery Compatibility: Single 18650 (Sold Separately)

Resistance VW/Bypass Mode): 0.1 Ohms – 3.5 Ohms

Resistance (Temperature Mode): 0.05 Ohms – 1.5 Ohms

Height: 2.95 Inches (75mm)

Width: 1.37 (35mm)

Depth: 0.87 Inches (22mm)

Aspire NX75-Z Box MOD Specifications:

1 x Aspire NX75-Z Box MOD

1 x USB Charging Cable

1 x User Manual

The Aspire Nx75 is a wonderfully sleek single 18650 device that is capable of the max output of 75 watts. The Nx75 is made of an extremely durable zinc alloy that leaves you with a comfortable and tough device.   Intuitively designed for easy navigation through the menu, the NX75 Mod from Aspire allows the user to easily access his or her wattage mode or temperature modes for quick changes.

 By simply clicking on the “W” button located on its face, you can effortlessly switch to power mode. Clicking the button again will allow you to alternate between variable wattage, variable voltage, and bypass modes with great ease. You can set the power output to as low as 1W and as high as 75W in 0.1 increments, by simply utilizing the operation buttons. This large spectrum of available power enables you to use your NX75-Z MOD with virtually any atomizer coil you wish.

By clicking on the “T” button located directly next to the “W” button, you can switch the device to temperature mode. With its embedded temperature control, sensing, and limiting capability, this phenomenal device will allow you to regulate the temperature of the atomizer coil itself. You can rotate between stainless steel, titanium, and nickel atomizer coil modes by simply clicking the “T” button again. It is important to note that temperature mode can only be used with these atomizer coil types, and will not work with any other type of coil.

One of the best characteristics of the NX75 is the battery compartment. The door which is affixed to the device by magnets acts as the housing for the single 18650. Instead of slipping the battery in between the positive and negative pins, replacing or installing the battery involves simply sliding the 18650 into the battery door chamber then letting the magnets do all the work of keeping everything in place. The mod feels 100% stable with absolutely no rattle when shaking so no worries of your battery suddenly falling out.

The Aspire NX75 is probably one of the most versatile and customisable box mods in the market. Supporting the ability to customise the menu screen with text of your choice not to mention full support for the standard gamut of temperature control modes such as stainless steel, nickel, and titanium. The pre-heat function is also highly adjustable allowing you fine-tune the exact output of your vape with a detailed power curve which you can even monitor as you’re vaping.There are three profiles that you can create for a temperature control profile. There is M1, M2 and M3. You can set the TCR value and a ramp up wattage setting. You can program and set a pre-heat ramp up wattage of 60 watts. That way you get the exact temperature control with a bit of ramp up to make it more responsive.